Equipment

RHYME R7000

SPECIFICATION

Out Power (8Ω) / (4Ω) / (2Ω): 2x 2350 / 2x 4400 / 2x 7000 W
Out Power (Bridge) (16Ω) / (8Ω) / (4Ω)¹: 4700 / 8800 / 14000 W
Performance with Gain: 35 dB and VPL: 100 V
THD 20 Hz – 20 kHz for 1 W: <0.1%
THD at 1 kHz and 1 dB below clipping: < 0.05 %
Signal To Noise Ratio: 112 dBA
Channel separation (Crosstalk) 1 kHz: > 70 dB
Frequency Response (1 W into 8Ω): 2.3 Hz – 56 kHz (+0/-3 dB)
Input impedance: 20 k Ohm
Input Common Mode Rejection, CMR: 50 dB
Output impedance I 100 Hz: 30 m Ohm
VPL, selectable per ch.³: 141, 118, 100, 85, 71, 59, 50, 42 V
VPL, when bridged ¹ ³: 282, 236, 200, 170, 142, 118, 100, 84 V
Voltage Peak Limiter mode (per ch.): Hard / Soft
Amplifier gain selectable (all channels)¹: 23. 26, 29. 32. 35, 38. 41, 44 dB
Default gain: 35 dB
Input connectors (per ch.): 3-pin XLR, electronically balanced
Output connectors (per ch.): Neutrik Speakon
Cooling: Two fans, front-to-mar airflow, temperature controlled speed
Operating voltage, 230V nominal: 130-265V
Minimum power-up voltage, 230 V: 171V
Power Average Limiter (PAL)³: Yes
Dimensions (WxHxD): 483 x 88 x 343 mm
Weight: 12 kg (26.4 lbs.)
Notes :
¹ Automatic-6 dB gam compensation when bridging channels.
² PAL can reduce the maximum output power to keep the power supply operating safely,
and/or to prevent excessive current draw tripping the mains breaker. Refer to Operation Manual.
³ For sine waves, peak voltage output values translate to Vrms with the formula V/1.41 = Vrms. E.g. 1DD V peak
equals app. 7D V peak. Hence, outputs can be set for high-impedance loads without requiring a transformer

Chat Whatsapp