EQUIPMENT

RHYME R4500
2x4500 Watts Amplifier

SPECIFICATION
Out Power (8Ω) / (4Ω) / (2Ω)
Out Power (Bridge) (16Ω) / (8Ω) / (4Ω)¹
Performance with Gain 
THD 20 Hz - 20 kHz for 1 W
THD at 1 kHz and 1 dB below clipping
Signal To Noise Ratio
Channel separation (Crosstalk) 1 kHz 
Frequency Response (1 W into 8Ω)
Input impedance
Input Common Mode Rejection, CMR
Output impedance I 100 Hz
VPL, selectable per ch.³ 
VPL, when bridged ¹ ³
Voltage Peak Limiter mode (per ch.)
Amplifier gain selectable (all channels)¹
Default gain 
Input connectors (per ch.)
Output connectors (per ch.)
Cooling
Operating voltage, 230V nominal
Minimum power-up voltage, 230 V
Power Average Limiter (PAL)³
Dimensions (WxHxD)
Weight

:
:
:
:
:
:
:
:
:
 :
:
:
:
:
:
:
:
:
:
:
:
:
:
:

2x 1600 / 2x 3000 / 2x 4500 W
3200 / 6000 / 9000 W
35 dB and VPL: 100 V
<0.1%
< 0.05 %
>112 dBA
>70 dB
2.3 Hz - 56 kHz (+0/-3 dB)
20 k Ohm
50 dB
30 m Ohm
141, 118, 100, 85, 71, 59, 50, 42 V
282, 236, 200, 170, 142, 118, 100, 84 V
Hard / Soft
23. 26, 29. 32. 35, 38. 41, 44 dB
35 dB
3-pin XLR, electronically balanced
Neutrik Speakon
Two fans, front-to-mar airflow, temperature controlled speed
130-265V
171V
Yes
483 x 88 x 343 mm
12 kg (26.4 lbs.)

Notes :
¹ Automatic-6 dB gam compensation when bridging channels.
² PAL can reduce the maximum output power to keep the power supply operating safely,
and/or to prevent excessive current draw tripping the mains breaker. Refer to Operation Manual.
³ For sine waves, peak voltage output values translate to Vrms with the formula V/1.41 = Vrms. E.g. 1DD V peak
equals app. 7D V peak. Hence, outputs can be set for high-impedance loads without requiring a transformer